Safety instructions for using elevators

1. Check if the certificate is in the elevator. Before taking the elevator, first pay attention to check whether there is any "Safety Inspection Qualified" mark issued by the quality and technical supervision department in the elevator, and pay attention to whether the mark is within the validity period, and encounter the elevator that has not posted the "Safety Inspection Qualified Mark" or exceeds the validity period of the test. You can call the 12365 hotline to report to the local authorities.


Second, wait for the elevator to stop at the corresponding floor and not crowded. Passengers open at the elevator floor door. Before entering the elevator, be sure to first observe whether the elevator car is at the corresponding floor position. It is very likely that the elevator car will fall due to the elevator car not in the leveling position.


3. Confirm whether the floor and car door are closed. When the elevator is in normal operation, the floor door and the car door should be closed. If it is found that the elevator door is not closed, it means that the elevator is faulty. Do not ride at this time to prevent a shear accident. In addition, passengers should not stay too much between the elevator floor door and the car door, in case the elevator suddenly runs in an unexpected failure state and a shearing accident occurs.


Fourth, overload alarms should not be forced into the crowd. Each elevator has its own load capacity. If the load exceeds the load, the elevator will not close the door. If the passenger is forced into the elevator at this time, the situation may cause the sling rope to slip and the elevator car to fall and fall.



Fifth, avoid dangerous actions such as playfulness, beating and jumping. During the operation of the elevator, passengers should not play, play, or jump in the elevator car. This behavior is particularly likely to cause the elevator safety device to malfunction, resulting in "sleepy people" and accidents.


6. Do not “handle the foot” on the ladder, do not lean on the car door. When entering the elevator, do not block the elevator door with your hands or feet, which may cause the system to malfunction and cause accidents. In this case, you can use the elevator switch button. After entering the elevator, do not lean your body against the door. Because there is only a distance of 5 mm to 10 mm between the elevator door opener and the sill, if the door is forced against the door at this time, the elevator may hit the sill on the sill during operation, which is dangerous.


7. If the elevator fails during the ride, passengers should not be alarmed, nor should they rush to get out of trouble by smashing, smashing or kicking the door. They should try to inform the elevator management department and maintenance personnel to rescue, waiting for professional rescue is guaranteed. A wise choice for security.